Pin Fin Tubes

A division of Concept Engineering International, A Heat Transfer Focus Company
Heat Transfer Specialists, Manufacturers of Turbulators, Wire Wound Fin tubes, Brass and Naval Brass plates

 Visit us at Stall C74 in the Thermal Processes Hall 6.1 at Achema, Frankfurt.



Crimp Fin Tubes

Material of Construction

Tubes: Carbon Steel, Stainless Steel 304/316, Copper, Cupro Nickel, Aluminium / Admiralty Brass.
Fins: Carbon Steel, Stainless Steel 304/316, Copper & Aluminium.
Tube outer diameter: 3/8" to 3/4", 1" to 4"
Fin height: 2 mm to 40 mm
Fins per inch: 8 - 12
Turbulators: Fin tubes can be offered with internally fitted turbulators of customer's choice.

Performance

These tubes performs like the L fin tubes which we have shown in the basic curves section. We can assist with design if required.


In our study we have isolated the airside and tube side coefficient and dealt with how to enhance both to get the optimum result.
The relevant literature can also be downloaded from the following websites

Stream Air Heater
catalog		 Fin tube catalog Air cooled heat exchanger
catalog		 Turbulators catalog

Concept Engineering

Currently over 90% of our production is directly exported to USA, Mexico, UK, Austria, Germany, UAE, Singapore, Malaysia, Thailand, Indonesia, Australia. We are looking at developing meaningful partnerships all over the world.

-Devang Jhaveri, President, Concept Engineering International.

Our Websites

1) www.allturbulators.com

2) www.conceptengg.com

3) www.pinfintube.com

Address:

Second Floor, K.K. Chambers,
Sir P.T. Road,
Fort,Mumbai-400001.

Contact details

Phone: 022-43533700/99
Email: mail@conceptengg.com
@2013 www.conceptengg.com All Rights Reserved. Developed by Syscomm Solutions